Formica to Fabulous: Tiling a Glass Mosaic Countertop

Standard

The Formica countertop in my daughters’ bathroom had to go…that much was clear.  Getting two teenaged girls to agree on its replacement was another matter indeed.  Granite? Tile? And what about color??  In the end, their mutual love of the ocean and all things seashore provided the answer: sea glass.  We all fell in love with a glass tile mosaic entitled Caribbean Glass with its swirls of blues, greens, and sand.  And here’s how I installed it…right over that ugly Formica.

Before

Before

After

After

The tile we chose comes in a 12×12 inch square, with individual tiles glued onto a net backing.  This makes it simple to cut out and remove tiles as needed.

615594

IMG_2217

Remembering the builder’s adage–measure twice, cut once–I laid out the tile to see where any cuts or adjustments were needed, especially around the circular sink cut-out.

IMG_2221

With a plan in place, it was time to start tiling.  First, I sanded the countertop with an electric sander since the thin-set adheres better to a rougher surface.

DSC01157

Using a notched trowel, I spread the thin-set directly onto the Formica countertop, covering only enough area to apply one or two tile squares at a time. Press the tile square firmly into the thin-set, cleaning off any thin-set that oozes through the backing onto the tile.

IMG_2230

I cut out a strip of two rows of tile to cover the front edge of the counter and a strip of three rows to cover the backsplash.

IMG_2263

Once complete, I allowed the thin-set to dry and harden for 24 hours before moving on to the next step–grout.

IMG_2236

Grout is cement that fills in the spaces between the tiles and holds them in place.  I chose unsanded grout since sanded grout can scratch glass tile. Using a rubber float, I spread the grout generously over the tiles, making sure that all spaces were completely filled in.

IMG_2238

After 15 minutes or so, the grout will dry to a haze.  I used a large damp sponge to then wipe off the haze from the tiles.  This can take several passes, rinsing and wringing out the sponge after each pass.  The final step was to wipe down the tile with a clean rag or towel to buff off any remaining haze and polish the tile.

I know my limitations, so I had our plumber install the new sinks and faucets once the grout had dried for 24 hours.  No sense in ruining all that hard work with burst water pipes!

IMG_2255

Goodbye Formica….hello sea glass!

IMG_2254

 

IMG_2260

 

 

 

 

 

Advertisements

3 responses »

  1. Pingback: Tile Countertops Cost Installed, Plus Pros and Cons of Tile Tops – Countertop Costs and Options for Kitchens and Bathrooms

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s